Maintaining your boat trailer: 9 Tips and Tricks
Transporting your precious RIB boat requires a trailer in perfect condition! That's why Orca Retail now offers you 8 tips to ensure the longevity of your trailer, from checking the brakes to maintaining the galvanized parts. These practical tips will help you enjoy your outings in complete safety!
Tip 1: Check your car's brakes
Before setting off, test your brakes at 10-15 km/h to ensure that the wheels lock simultaneously, that the trailer stays in line, and that braking is smooth. If you have any problems, consult a professional for optimum adjustment.
Tip 2: Check the electrical part
Before every trip, check that your trailer's rear lights are working properly. Opt for waterproof lights to facilitate maintenance and reduce vibrations during transport.
Tip 3: Grease all necessary parts
Components such as ball joints, screws, bearings and rollers should be regularly cleaned and greased. This protects against corrosion, especially before wintering.
Tip 4: Check your tires and wheels
Correctly inflated tires contribute to safer driving and even wear. Check trailer tire pressure regularly.
In addition, make sure the jockey wheel is running smoothly by turning it fully. Regular lubrication is essential to keep it running smoothly.
Tip 5: Balance your expenses
Always comply with the recommended weight limits for your trailer. Make sure the load is evenly distributed on the trailer to avoid any imbalance during transport, which could affect handling.
Tip 6: Inspect straps and fasteners
Before each trip, check the condition of the straps and restraints. Worn or damaged straps can compromise transport safety.
Tip 7: Rinse the trailer
After each use, rinse the trailer thoroughly to remove all traces of salt, thus preventing corrosion. Then drive for a few minutes to drain off any residual water.
Tip 8: Clean galvanized parts
Clean galvanized parts after each use to prevent corrosion. Salt water can cause rust, requiring careful cleaning. Apply anti-corrosion products to exposed metal parts to protect the trailer from rust.
When putting the wheels in the water, take care to immerse them only up to the crown of the tire, to avoid oxidation.
Tip 9: Prepare for wintering
When winterizing, jack up the wheels to prevent deformation of the tires. Use stanchions for stable support. Finally, protect electrical parts from potential damage.
Conclusion
Follow these practical tips to ensure the longevity of your boat trailer. With regular maintenance, you'll be able to sail safely and enjoy your passion to the full.
Discover our products!
Read more about the world of RIBs :
